A Look At The Myths And Facts Behind Saab 9-3 Key Replacement
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to take to add the second key. This requires a handheld computer, called Tech-2 that is operated by the dealer. A new key and transponder have to be purchased and programmed to the car.
Rotate your keys to stop one from wearing out faster than another. This will also keep your keys in pristine condition.
Replacement Case
Contrary to the classic Saab keys of old keys, the latest key fobs are equipped with electronics which makes it hard to copy. This has made stealing cars considerably more difficult than it was years ago. But, it has also made the replacement of lost keys a more expensive task.
Saab 9-3 owners should have two keys that work. If one of them is lost, it is expensive to get another one for the car because it involves replacing the CIM module and re-programming the locking cylinders. Dealers usually charge between $100-$200 to do this.
There are ways to avoid these high costs. Some parts providers will use the code of an old key to cut a brand new metal blade at a fraction what the dealer charges. The key must be the exact same as the original to allow it to function in your vehicle.
Follow these steps to replace the case. You will need an flathead screwdriver and patience. Utilizing the screwdriver, slowly pull the plastic apart and remove the emergency key from the case. Once you have the case opened, take out the electronics and place them into your new case. Make sure to insert the correct key and badge back into the case, as well.
Replacement Battery
The Saab 9-3 replacement battery is a low-cost component that can be easily and quickly replaced. This YouTube DIY video Cyclone Cyd shows how to replace the battery of the remote key fob in just four steps. This tutorial will work with any modern Saab key fob. However, the procedure may differ slightly.
This button is usually placed near the Saab logo on the back of the fob. It is usually located next to the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver into the small hole on this button. This should be sufficient to allow you to open the fob case in order to change the battery.
Once you have installed the batteries CR1632, you can put back together your remote key fob. Then, you can program it into your car. The whole process should not take more than an hour. This is a very easy procedure that doesn't require special tools.
If you lose a key, the procedure will be more complicated however it can be accomplished. The dealer must first read the VIN of the vehicle and then order an alternative TWICE module, as well as a key blade with the proper unique code. Then, they'll be required to cut the replacement key and then program it using an innovative software tool called MDI.
Key Replacement Fob
The key fob comes with batteries that are used to lock and unlock your car. The batteries are able to last for and eventually fail. This is a common problem that happens to all cars and the good news is that you can replace the batteries in a majority of fobs, without replacing the entire case. Amazon sells replacement fobs that have all the electronics installed. You can simply remove the case and replace the batteries. You will need to remove the emergency key before you can replace the batteries. To accomplish this, simply insert a small flathead screwsdriver into the slot in the middle. The case should split when you turn the screwdriver around it.
If you are about to replace the keys ensure that you have a spare, because this can cut down the total cost by a significant amount. If you have an extra key, you can request the dealer to cut it and program it for your car. This is much less expensive than purchasing a brand new key fob.
If you do not have a spare key car key, you can add another key to your car, however this will require a lot of research and effort. It costs around a hundred dollars to add a second car key. The computer in the vehicle also has to be programmed. Professionals can do this however, it's a costly option.
saab 9-3 key not accepted contact service -3 is an alarm system that is more sophisticated that is based on a key code. This means that when you lose your sole working key, replacing it with another key can be extremely expensive as the car has to have a specific computer module installed and it must also be specifically programmed to accept an extra key. Locksmiths typically aren't able to program this and dealers will charge hundred dollars to program the new key!
If you've lost your sole working key, a dealer will replace the computer in your car (known as the CIM or SAAB TWICE) in order to make the replacement, and will charge you the highest price for it. We can reprogram the EEPROM inside your car's computer to make it prepared for a new key. This will save you more than 50% off what you would pay at the dealer.
If you have owned a car like the SAAB 9-3 for many years you're aware that the ignition keys aren't very durable. They can become extremely sticky and the buttons are known to fall off of them at times and you should think about purchasing a new one if yours isn't working as it should. It's not as difficult as it seems to replace the ignition key. With the right tools, it is able to be done quickly.